Four Lanes Aluminum Nespresso Coffee Capsule Filling Sealing Machine With CE Certificate

Four Lanes Aluminum Nespresso Coffee Capsule Filling And Sealing Machine

With CE Certificate

Introduction of the four lanes aluminum nespresso coffee capsule filling and sealing machine

The machine has four lanes to finish the filling and sealing processes. It can save more human labor. It has European standard configurations. More healthy and friendly to human being and the environment.

Paramaters of the four lanes aluminum nespresso coffee capsule filling and sealing machine

Advantages of the four lanes aluminum nespresso coffee capsule filling and sealing machine

1.The machine’s contact with food areas are all stainless steel;

2.High precision of the chain wheel, gearbox, bearing and dividing box determine the fast, stable and accurate operation of the machine. 

3.The high-quality pneumatic components make the air circuit of the machine run stably. The stable air pressure and the even air flow inside the machine greatly avoid the failure, namely can greatly improve the production capacity and guarantee the service lifetime of the machine;

4.Electrical parts are from most famous brands with best quality (Schneider, Siemens, Allen-Bradley…)

5.Capsule sorter and lifting and conveying system greatly save labor costs;

6.UV sterilization system provides a good production environment for capsule production;

7.The peristaltic pump drop filling device is ready for adding liquid flavors in the capsule in the future;

8.The second strengthen heat sealing. It eliminates the risk of defective products entering the market, even if the first heat seal fails;

9.The online weighing device feeds the data back to the PLC in real time, identifies the defective products and automatically eliminates them;

10.Discharging over-turning device prepares for the following packaging of the capsule, bagging or cartoning;

11.Roll film cutting and sealing system with high-precision fine tooth cylinder blade can realize online cutting and sealing at the same time. The sealing deviation is within 0.1mm. With the identification mark system, servo motor drives roll film expansion and dragging precisely;

12.With nitrogen filling device, it creates a low-pressure environment. When the nitrogen source pressure and flow rate meet the conditions, the residual of Oxygen will be reduced to less than 1% in the capsule, so that the fresh coffee is sealed and wrapped by highly pure nitrogen;

13.The remote control system, to a great extent, solves the problem of international PLC and HMI inconsistency of the software installed on the PC side. Moreover, the customer can observe the condition of the parameter value of the machine, the failure rate of the machine, the production efficiency and so on in real time every day through the mobile app;

Capsules of the four lanes aluminum nespresso coffee capsule filling and sealing machine

It can be fill into 0-6g coffee powder, and can be protected for 36 months.

The sealing film is aluminum foil, and its thickness is 30 microns.

The diameter of the capsule is 37mm.

ps: we also have PP nespresso coffee capsules and biodegradable nespresso coffee capsules.

Certificates of the four lanes aluminum nespresso coffee capsule filling and sealing machine